Sacramento Fire Protection

Sacramento, California | Fire Protection

When we all work together towards fire safety and practice fire safety in our homes, at work, in schools and at play it helps to make a safer place for all of us.

Sacramento Fire Codes

When opening a new business or building a new home, before starting new construction, remodels, retrofits or rehabs its best to check all local fire codes in Sacramento to ensure your building, facility or structure will comply with fire code rules and regulations.

Sacramento Code Compliance Division

"The Sacramento City Council has adopted City Codes (laws) specifically designed to address blight, nuisances, and to maintain a clean environment for all citizens in our community. The City of Sacramento does this by working in partnership with the people of Sacramento.

The mission of the Code Compliance Division is to promote and maintain a safe and desirable living and working environment. We help maintain and improve the quality of our community by administering a fair and unbiased enforcement program to correct violations of municipal codes and land use requirements."

Sacramento Fire Department

Sacramento Fire Department

Contact the Sacramento Fire Department or speak with the Fire Marshal if you have questions regarding fire codes in Sacramento. The fire protection systems that should be installed, serviced and maintained such as fire sprinklers, fire alarms, fire extinguishers, fire suppression systems, fire hydrants and all applicable evacuation signage and nameplates.

Sacramento Fire Protection

Fire protection systems such as fire sprinklers, fire alarms, fire extinguishers, fire suppression systems, fire hydrants, fire pumps, standpipes, wet pipe and dry pipe fire protection systems installed in your business, commercial building or home residence.

Each fire protection system will need to go through a process from permit applications from the City of Sacramento to final installation and of course keeping it maintained through NFPA standards and codes, Sacramento fire codes, rules and regulations. Always work with fire protection companies, contractors, technicians or fire safety engineers that carry active State license in Sacramento.

Sacramento Fire Protection Design

It all starts with Design. The design of your fire protection system should be completed by an active State licensed fire protection company, fire protection contractor or fire safety engineer in Sacramento. Your home, commercial building, office or structure will be measured, the fire dangers will be evaluated, evacuation routes will be drawn, where to install fire sprinkler systems, fire extinguishers, fire suppression, fire hydrants and any other components required to help you comply with fire codes.

Sacramento Fire Protection Engineering

Engineering your Fire Protection System in Sacramento will be completed by a Fire Protection Company, Contractor and/or Fire Safety Engineer. Engineering your fire protection system consists of knowing Federal, State, and City Fire Codes, Rules and Regulations, any Health and Safety Codes, Rules, and Regulations and how to properly configure the fire protection system to work at preventing or extinguishing the fire.

Sacramento Fire Protection Estimates, Bids, Quotes, Costs

Obtaining an estimate, bid or quote towards installing, service or repair of any fire protection system is a great way to determine which fire protection company you will choose to do business with. Shopping a few companies allows you to see how they will treat you the customer and their response time to any questions that arise. Besides the detailed estimate allows you to see what systems will be installed and a detailed breakdown for the costs.

In Sacramento you may have to comply with fire codes, rules and regulations. Check with your local fire marshal for details of what fire protection systems you may be required to install, such as fire sprinklers, fire extinguishers, fire suppression, kitchen or restaurant fire suppression, fire hydrants, fire pumps, standpipes, fire rated doors, signage to notify patrons of emergency exits or much more.

Fire protection systems can be very costly depending on the type of fire protection systems you install such as fire sprinkler, fire alarms, fire extinguishers, fire suppression systems, restaurant and kitchen suppression systems, auto body paint spray booth suppression systems, or even large deluge dry chemical fire suppression and sprinkler systems used in industrial facilities, marine small and large boats or naval ships like aircraft carriers.

Sacramento Fire Protection Installation

Installing a Fire Protection System into your home, office, commercial building, or structure allows you to rest easier, and gives peace of mind, knowing that your family, friends, and/or business clients will be safer from the hazards of fire.

Installation of the fire protection system in Sacramento should be completed by fire protection companies or fire protection contractors that carry active licenses in the State and City of Sacramento. Installation will occur after measurements are taken, fire hazards evaluated, evacuation routes planned, and fire protection systems that will be used for placement in your home, office or commercial facility.

Sacramento Fire Protection Tests

All fire protection systems should be tested and inspected per NFPA standards and codes, Federal, State and the City of Sacramento fire codes, rules and regulations.

Fire protection systems and the use of fire sprinkler, fire alarms, fire extinguishers, fire suppression systems, fire hydrants, standpipes, fire pumps, control valves, wet pipe, dry pipe all require periodic tests and inspections to be performed ensuring the system operates in the event of an emergency or fire.

Actively licensed fire protection companies, contractors, technicians and/or fire safety engineers are able to test and inspect your fire protection system and make sure you are complying with all Federal, State, and City fire codes, rules and regulations and health & safety codes in Sacramento.

Sacramento Fire Protection Inspections

Fire Protection Inspections are done in Sacramento to comply with Federal, State, OSHA, NFPA and the City of Sacramento fire codes, rules and regulations. A fire protection system may have fire sprinklers, fire extinguishers, fire alarms, fire suppression systems, fire hydrants, standpipe fire sprinklers or many other fire protection systems installed that must be inspected and tested regularly to avoid violations.

Inspections should be completed by state licensed fire protection companies or fire protection contractors. You should request an estimate, bid or quote before you begin service work with any fire protection company in Sacramento.

Sacramento Fire Protection Maintenance

To keep your Fire Protection System functioning properly in Sacramento you will need to complete routine Maintenance, Perform Tests, and Complete Annual Inspections. These are described in NFPA standards and codes.

Without proper fire protection maintenance your fire protection system may fail to operate, just like a car without an oil change. Due to fire codes, rules and regulations many of the routine maintenance that should be performed according to NFPA standards and codes, Federal, State, OSHA or the City of Sacramento should be completed by actively licensed fire protection companies.

Sacramento Fire Protection Repairs

When your Fire Protection System fails to operate or function properly you will need to Repair your fire protection system. In Sacramento a Fire Protection Company, Contractor and/or Fire Safety Engineer will be able to evaluate the fire protection system, find the areas that are in need of maintenance or repair, and fix the problem.

Repairs that are needed are often found when the fire protection systems have their semi-annual and annual tests and inspections performed by actively licensed fire protection companies. However burst pipes, leaky fire sprinkler heads, broken control valves, fire pumps or faulty detectors can all cause need for repairs to be completed.

The City of Sacramento may require you as a business owner to repair any issues with your fire protection system to avoid receiving a violation and fine. If you do receive a violation from the fire department, fire marshal or safety code compliance officer contact a few actively licensed fire protection companies in Sacramento to obtain estimates towards the costs of repair.

Sacramento Fire Protection Remodel

Remodeling a Fire Protection System in Sacramento is the process when your existing fire protection system needs to be updated and brought up to Federal, State, and City Fire Codes, Rules and Regulations as well as Health and Safety Codes, Rules and Regulations.

The existing fire protection system will be evaluated, fire sprinklers, fire suppression systems, fire alarms, fire hydrants, fire extinguishers and their placement, sprinkler head placement, control valves, evacuation routes, as well as fire detector alarms and smoke alarms.

The remodel of the fire protection system will be rebuilding the existing system sometimes from the ground up to ensure you meet or exceed Fire, Health and Safety Codes, Rules, and Regulations. All work should be completed by an actively licensed fire protection company or fire protection contractor with the State and City of Sacramento.

Sacramento Fire Protection Retrofitting

Retrofitting a Fire Protection System in Sacramento is the process of adding a fire protection system to an existing home, commercial building or structure that does not have any fire protection present.

The Fire Protection Company, Contractor and/or Fire Safety Engineer will evaluate the existing fire dangers, walls, water supply, and blueprints of the building. Their job is to ensure your fire protection system is properly installed, pass inspections and comply with Sacramento fire codes, rules and regulations.

Sacramento Fire Protection 5 Year Inspections / 5 Year Certifications

Each State has its own requirements, rules and fire code regulations. In California Title 19, Health and Safety Codes, NFPA, and possibly the City of Sacramento Fire Codes may require you as a business owner to have your fire sprinkler system tested and inspected every 5 years by a State licensed fire sprinkler company in Sacramento.

Having a properly functioning fire protection system, is not only required in most commercial buildings, but if you have fire sprinklers, fire extinguishers, fire alarms, fire hydrants and/or fire suppression systems may help you qualify for discounts from your insurance company and/or fire hazard insurance provider. Contact your insurance or fire hazard insurance provider for details.

The tests and inspections that are completed in your 5 year fire sprinkler certification or Title 19 helps to ensure that your installed sprinkler system is properly working, there to help save lives and always helping prevent the devastating effects of fire.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Fire Sprinkler Installation

Fire sprinkler companies in Sacramento will have a designer, engineer or fire safety engineers capable of quickly assessing the fire risks present in your home, office, parking structure, high rise, skyscraper, commercial building or structure. The fire sprinkler company or fire contractor should assist with obtaining permits, submitting drawings & blueprints and accommodate or work around the owner, architects, superintendant, foreman or general contractor present.

Contact a local fire marshal to help ensure you comply with all Federal, OSHA, State, Municipal or fire codes, rules and regulations in Sacramento. Always obtain detailed estimates, quotes or bids to install a fire sprinkler system in Sacramento before you begin installation or commit to a fire sprinkler company or fire protection contractor.

Always make sure you are working with actively State licensed fire sprinkler companies or fire sprinkler contractors before committing to any company in Sacramento.

Sacramento Commercial Fire Sprinkler Installation

Installing commercial fire sprinkler systems may be required for owners of commercial buildings, stores, building with occupancy ratings and many other structures. Check with your local fire marshall to find out what may be required to install in your place of business in Sacramento. Business owners may also be required to install fire extingushers, fire alarms, fire hydrants, standpipe systems, fire pumps, fire rated doors, alarm systems, clean agent fire suppression systems, etc...this mostly depends on the fire hazards present at your facility.

Sacramento Residential Home Fire Sprinkler Installation

Securing your home and protecting your loved ones and personal valuables from danger is a priority for all of us. New fire codes may also require you to install residential home fire sprinkler systems too. Contact a local actively licensed fire sprinkler company or fire sprinkler contractor in Sacramento to install residential home fire sprinkler systems. Get a few estimates, bids or quotes from reliable and dependable residential home fire sprinkler companies.

Available Fire Protection Systems

Water Based Fire Sprinkler Systems

Wet Pipe Fire Sprinkler System

Antifreeze Fire Sprinkler System

Dry Pipe Fire Sprinkler System

Deluge Fire Sprinkler System

Pre Action Fire Sprinkler System

Combined Dry Pipe and Pre Action Systems

Standpipe Fire Protection Systems

Wet Standpipe Fire Protection

Dry Standpipe Fire Protection

Combined Standpipe Fire Protection

Private Fire Service Mains

Fire Pump

Water Tank

Water Spray Fixed Fire Protection Systems

Deluge Foam Water Fire Sprinkler

Foam Water Fire Sprinkler System

Fire Control Valves

Portable Fire Extinguishers

Water Fire Extinguishers

Foam Fire Extinguishers

Liquefied Gas Fire Extinguishers

Dry Chemical Fire Extinguishers

Fire Alarms

Fire and Heat Detection Alarms

Fixed System Fire Extinguishers

Fire Suppression Systems

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Fire Sprinkler Repair

Many times repairs that are required on your fire sprinkler systems are discovered when an inspection is performed. This is why NFPA created standards and codes that many Federal, OSHA, State and even the City of Sacramento have adopted into their fire codes, rules and regulations.

In order for your home, office, commercial business or structure to clear violations you may need to have repairs completed by an actively licensed fire sprinkler company or fire protection company in Sacramento. This may include a series of tests and inspections that will be performed, repairs, replacement parts or components to your installed fire sprinkler system.

Sacramento Commercial Fire Sprinkler Repairs

Commercial business owners are responsible for properly maintaining their installed commercial fire sprinkler systems. You do not want to receive violations from the fire department, fire marshal or any other applicable agency. Since many repairs are discovered during an inspection it is strongly suggested that you adhere to the NFPA standards and codes for all installed fire protection systems.

This will include installed fire sprinklers, fire extinguishers, fire alarms, fire suppression systems, fire hydrants, standpipes fire sprinklers, fire pumps and fire rated doors or even the fire protection signage you see posted in many commercial or public buildings.

Sacramento Residential Fire Sprinkler Repairs

Your home fire sprinkler system may require repairs when you discover leaks, pressure loss, faulty fire sprinkler heads or control valves. Repairs are often discovered during an inspection of your installed home fire sprinkler system. Make sure you comply with NFPA standards and codes for all inspections and tests that must be performed to ensure your installed residential home fire sprinkler system is always ready to protect your home.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Fire Suppression Systems

Fire suppression systems are designed to extinguish fires for areas of high fire risk, or where highly flammable materials are present. They are used in locations where water discharge from fire sprinklers may cause fire to spread, materials or gases present that are highly flammable and require a more sophisticated fire protection system.

Fire suppression systems use dry chemicals or gases to extinguish fires; they are often referred to as clean agent fire suppression systems as they use clean agents or gases to extinguish fires.

Sacramento Fire Suppression Estimates

Estimates should be obtained before any installation, service, maintenance, repairs, tests or inspections are performed. Have any work completed by fire protection companies that carry active licenses in Sacramento in order to comply with fire codes.

Estimates help you determine which fire suppression company you wish to do business with, it allows you to meet with a few fire protection companies to get to know how they service you the client, it can also build your confidence knowing you will be working with a fire protection company interested in helping you comply with fire codes and avoid violations.

Fire Suppression Systems Include:

• Vehicle Fire Suppression Systems
• Marine Fire Suppression Systems
• Naval & Aircraft Carrier Fire Suppression Systems
• Restaurant & Kitchen Fire Suppression Systems
  • Designed to extinguish where fires start and spread quickly
  • Designed to extinguish highly flammable areas such as grease fires
• Auto Body Paint Spray Booth Fire Suppression
• Industrial Fire Suppression Systems
  • Designed to extinguish high temperature and highly flammable items such as molten metals

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Portable Fire Extinguishers

Portable fire extinguishers have separate classes depending on the contents of the extinguishing gas, chemical or fluid. Each fire extinguisher is distinguished and designed for specific area use. Fire extinguishers have a tremendous ability to contain the rapid spread of fire in most circumstances if the fire is caught early on. Fire extinguishers are rated to extinguish fires from

• Class A fires such as organic solid material such as wood
• Class B fires that involve liquid such as gas and oil
• Class C fires that involve electricity
• Class D fires that involve combustible metals
• Class K for use in oil fires used in Kitchens

Always work with actively State licensed fire extinguisher companies in Sacramento to perform any service, repair, refill, recharge, hydrostatic tests or replacement of installed fire extinguishers.

Types of Portable Fire Extinguishers

Water Fire Extinguishers

Foam Fire Extinguishers

Liquefied Gas Fire Extinguishers

Dry Chemical Fire Extinguishers

Fixed System Fire Extinguishers

Fire Suppression Systems

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Fire Protection Services in Sacramento

Federal, OSHA, State fire code, rules, regulations and/or Health and Safety codes may require that you have an actively State licensed fire protection company, contractor and/or fire safety engineer build a fire protection system for your home, office, commercial building, industrial facility, high rise, skyscraper, building or structure.

Always work with actively State licensed fire protection companies in Sacramento. Your local fire marshal will have additional details on current fire codes, rules and regulations in Sacramento.

Sacramento Fire Protection Design & Engineer

This will include the initial design and engineering of your fire protection system which helps detail the use of installed systems such as fire sprinklers, fire extinguishers, fire suppression and the use of fire alarms systems. The fire protection company should assist with obtaining permits from the City of Sacramento to install the new fire protection system.

Sacramento Fire Protection Installation

Installation of fire protection system will require that your home or office be measured by a State licensed fire protection company, contractor or a fire safety engineer, evaluated for the fire dangers present and design a system to effectively contain and/or extinguish the presence of fire as well as comply with all fire codes, rules and regulations.

The fire protection company should work with existing architects, contractors, foremen to incorporate the installation of the fire sprinklers, fire alarms, fire extinguisher or fire suppression systems that may be installed into your home, office, commercial building or facility in Sacramento.

Sacramento Fire Protection Repairs, Tests & Inspections

The fire sprinkler and fire protection system will require maintenance and upkeep once installed. Some minor tests and inspections can be done by you; others will require professional assistance from a licensed fire protection company, contractor and/or fire safety engineer in Sacramento.

NFPA standards and codes has created schedules for routine tests and inspections that should be performed semi-annual, annually, 1 year, 3 year and 5 year periods. During these tests and inspections of your installed fire protection system technicians may discover there are problems that require repair, replacement, service or maintenance.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Antifreeze Fire Sprinkler Systems

Antifreeze fire sprinkler systems are designed for use in cold climates, just like the dry pipe fire sprinkler system it will not freeze on you when temperatures fall below 40 degrees Fahrenheit. The antifreeze fire sprinkler system is a network of pipes, alarms, control valves, and automatic fire sprinkler heads designed, engineered and installed to operate in colder temperatures.

The installation of antifreeze fire sprinkler systems would be needed if the temperature falls below 32° Degrees Fahrenheit where freezing begins. Antifreeze systems can also be used in cold storage rooms, where the need for fire protection becomes relevant. Always maintain, service, repair, test and inspect any installed fire protection system in order to ensure proper operation in case of an emergency.

Sacramento Antifreeze Fire Sprinkler Safety Alert

There is a new safety alert issued by NFPA regarding antifreeze fire sprinkler systems:

Background
Following reports of a fire incident involving a sprinkler system that contained a high concentration antifreeze solution, research and standards development activities were begun to address concerns raised by the combustibility of antifreeze solutions in residential sprinkler systems. As information became available, NFPA published two successive Safety Alerts providing guidance from NFPA in its role as a safety advocate and announcing Tentative Interim Amendments (TIAs) to NFPA sprinkler standards that were issued by the NFPA Standards Council. The TIAs and the additional NFPA guidance offered in those Safety Alerts were interim actions while the responsible standards development Technical Committees reviewed the results of the research and reached consensus on further amendments to the NFPA sprinkler standards.

The sprinkler committees have now completed the review and consideration of the issues related to the use of antifreeze in sprinkler systems and, based on the available information, have reached consensus on four TIAs that were issued by the NFPA Standards Council (PDF, 81 KB) on March 1, 2011. The four TIAs achieve a more comprehensive approach to the treatment of antifreeze in NFPA sprinkler standards, and provide new requirements for the use of antifreeze in both new and existing residential occupancies and in non-residential occupancies as well.

Antifreeze Fire Sprinkler Tests & Inspections

NFPA 13D has created a standard for the installation of fire sprinkler systems, detailing information for the combined dry pipe and pre action system. “1.1” Scope. 1.1.1 This standard shall cover the design, installation, and maintenance of automatic sprinkler systems for protection against the fire hazards in one- and two-family dwellings and manufactured homes. 1.1.2 This standard assumes that the sprinkler system is designed to protect against a fire originating from a single ignition location.”

Sacramento Fire Protection

Installing fire protection systems in Sacramento and the use of fire sprinkler systems, fire extinguishers, fire suppression, restaurant and kitchen fire suppression, fire hydrants, backflow preventers, standpipes, fire pumps, fire alarm systems and of course the fire safety signage, emergency lights, fire rated doors or any other fire and safety products. Helps you protect your home or business, comply with any fire codes related to your business or home and possibly save lives from the dangers of fire.

Many business owners may be required to install fire protection systems in Sacramento, check with your local Fire Marshal, or any Federal, State, OSHA and make sure you are complying with your companies insurance requirements. Contact a State licensed Sacramento fire protection company for details.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Combined Dry Pipe & Pre Action Systems

Using a combined dry pipe and pre action fire protection involves installation of the following fire protection components, exterior water supply main, penetration fire stopping, fire detection and alarm systems, fire protection general requirements, and fire pump systems. The combined dry pipe and pre action system uses multiple components to extinguish the fire. The fire detection alarms initiate the automatic fire sprinkler heads, where pressurized water then sprays unto the specific area for containment and to extinguish the fire.

Combined Dry Pipe & Preaction Applications

Combined systems are often installed where the temperature will drop below freezing range. Combined dry pipe and preaction systems are also present where water disbursed from a water based fire sprinkler system may damage computers, data centers, museums, clean rooms and labs. Clean agent fire suppression systems use dry chemicals or gases to extinguish fires and therefore eliminate the need for water discharge.

Sacramento Combined Dry Pipe and Pre Action Tests & Inspections

NFPA 13D has created a standard for the installation of fire sprinkler systems, detailing information for the combined dry pipe and pre action system. “1.1” Scope. 1.1.1 This standard shall cover the design, installation, and maintenance of automatic sprinkler systems for protection against the fire hazards in one and two-family dwellings and manufactured homes. 1.1.2 This standard assumes that the sprinkler system is designed to protect against a fire originating from a single ignition location.”

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Combined Standpipe Fire Sprinklers

A combination system of both dry standpipe fire sprinkler systems and wet standpipe fire sprinkler systems, it is not unusual to have both systems installed in a high rise or multi floor building as the flammable materials present may require both forms of fire protection. When combined you may have a dry standpipe fire sprinkler system combined with either wet standpipe fire sprinklers, or automatic fire sprinkler system. See standpipe fire protection systems or see NFPA 14 for more information.

Sacramento Standpipe Fire Sprinkler Installation

Standpipe fire sprinklers systems are used in buildings that have more than one story, such as two, three, four-story buildings and any high-rise building or skyscraper. Standpipe sprinklers when installed will generally have an access point on each floor for the fire department to connect fire hoses through fire hose control valves.

Every high rise or skyscraper should enlist the use of standpipe fire sprinklers or comparable fire protection or suppression system for each and every floor of the building.

Sacramento Fire Sprinkler Service & Repair

All fire sprinkler systems require routine maintenance, service & repair. Fire sprinkler manufacturers will have a list of all tests and inspections that can be performed by you the owner. Federal, State, City, OSHA, NFPA, Insurance Companies or any other applicable agency may have additional requirements for service, repair or maintenance that must be performed by a State licensed fire sprinkler company in Sacramento.

Fire sprinkler heads, control valves, fire pumps, basically any part of the fire sprinkler system can become faulty and need repair or service. Fire sprinklers can build with minerals from water deposits, gaskets get old, water pressure drops, hydrostatic tests, fire sprinkler heads leak, fire sprinkler pipes burst there are many issues that can cause repair of your installed fire sprinkler system. Contact a fire sprinkler company in Sacramento to handle any repairs or services required for your fire sprinkler system.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Commercial Fire Alarms

The first line of defense against fire in protecting your place of business, company or commercial building will be its fire alarm and/or fire detection alarms. The alarm sirens will sound the alert to all patrons, clients and employees there is an emergency and possibly the presence of fire. Thre alarm siren notifies patrons to evacuate, personnel to respond and calls for emergency services to be dispatched and/or time for you to possibly contain the fire.

Fire alarms should be installed in any building, structure or facility where hazardous of flammable material can be present. Any fire alarm system should be inspected and tested regularly by keeping your fire alarm system properly maintained you just may save a life. Federal, State, OSHA, City, Insurance Company, or any other applicable agency may require the installation of a fire alarm system in Sacramento. Business owners can check with Sacramento City Planning, Building and Zoning or any local fire marshal for details in what may be required to install in your place of business or company.

Many fire alarms will have a control panel, primary & secondary power supply, at least one installed pull switch or button and alarm sirens in adequate locations to notify you in the event of a fire. Shop and get estimates from a few fire protection companies in Sacramento to find the lowest costs and best deals.

Sacramento Fire Alarm Installation, Service & Repair

Fire alarm systems should be installed by State licensed fire alarm companies to comply with any fire codes in Sacramento and to ensure proper operation of your fire alarm system. Make sure you know the procedures to operate your new fire alarm system and which tests or inspections may be required to keep your system working. Troubleshooting, repairs or service to fire alarm systems should be completed by a State licensed fire alarm company in Sacramento.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Commercial Fire Sprinkler Estimates

How much will a commercial fire protection and fire sprinkler system cost to have installed in my commercial building or structure? How do I obtain a commercial fire sprinkler estimate?

The best answer is to obtain a few estimates, bids or quotes from reliable, dependable State licensed fire sprinkler company’s or fire sprinkler contractors in Sacramento. Every building will have unique rooms, hallways and exits not to mention the fire hazards present differ for each business. A store like Wal-Mart, Home Depot or Lowes may require additional fire protection through the use of clean agent fire suppression or dry pipe fire sprinkler systems due to the fire hazards present in their store inventory. Gas stations, oil refineries, Navy ships, military bases may require many additional fire protection systems to be installed due to the fire hazards present.

Obtaining an estimate means you must find fire protection companies capable of assisting your business comply with all fire codes, rules and regulations. Your local fire marshall can help in letting you know what fire codes exist in your area in Sacramento.

Sacramento Fire Sprinkler Estimates, Quotes, and Bids

Owning a building that is used for commercial or public use requires that you adhere and comply with all Federal, State, Building Codes, Fire Codes, Rules, Health and Regulations in Sacramento. This may require you to install, remodel, or retrofit a fire protection and fire sprinkler system.

Estimating the cost of your commercial fire protection and fire sprinkler system depends on the size of your commercial building or structure, flammable materials present, type of fire coverage, detection, and fire alarms that are installed. Fire sprinkler companies are able to send a fire safety engineer or State licensed fire protection installer, technician or contractor to your facility to begin the fire sprinkler estimate.

The fire safety engineer or State licensed fire protection installer, technician or contractor will assess and evaluate the fire dangers that are present in your facility and what types of fire protection systems are needed to provide fire prevention coverage to those areas. The will also review your buildings evacuation exits and make sure fire alarms are properly installed.

When building new construction for commercial or public use, you must comply with all State Building Codes, Fire Codes, Rules, Health and Regulations in Sacramento. This may require you to have adequate fire protection through installed fire sprinklers, fire extinguishers, fire alarms, fire hydrants, standpipes, fire pumps, fire suppression systems installed into your facility.

Remodeling an existing commercial buildings fire protection system to bring it current with State Fire Codes, Rules, Health and Regulations requires that your facility have a fire safety engineer or licensed fire protection contractor rebuild your existing fire protection and fire sprinkler system to have it meet or exceed State Fire Codes, Rules, Health and Regulations.

Retrofitting your commercial building occurs in the event that your facility never had a fire protection of fire sprinkler system installed. The fire safety engineer or licensed fire protection contractor then designs and engineers a fire protection and fire sprinkler system around the structure of the building with existing water and power supplies.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Deluge Fire Sprinkler System

If there are concerns where highly flammable materials are present installing a deluge fire sprinkler system may be optimal for your facility or at least the specific area where flammable materials are present. The deluge fire sprinkler system is a network of pipes, connected to control valves, fire detection, smoke, or fire alarms, fire sprinkler heads that remain open and/or the heat sensing element is removed from the fire sprinkler head or the fire sprinkler heads are designed specifically for the deluge fire sprinkler system.

The fire sprinkler pipes remain void of water until the deluge fire sprinkler is activated causing the pipes to be filled with water. The deluge fire sprinkler system is not pressurized, which means it is atmospheric pressure so for the water not to pour out of the sprinkler heads a special deluge fire sprinkler valve will need to be installed.

Sacramento Fire Sprinkler Tests & Inspections

All tests and inspections should be performed by actively licensed fire sprinkler companies or fire sprinkler contractors in Sacramento. Below are some of the tests and inspections that may be performed according to NFPA standards and codes.
NFPA 13D has created a standard for the installation of fire sprinkler systems, detailing information for the combined dry pipe and pre action system. “1.1* Scope. 1.1.1 This standard shall cover the design, installation, and maintenance of automatic sprinkler systems for protection against the fire hazards in one- and two-family dwellings and manufactured homes. 1.1.2 This standard assumes that the sprinkler system is designed to protect against a fire originating from a single ignition location.”

NFPA 25 1.1* Scope. This document establishes the minimum requirements for the periodic inspection, testing, and maintenance of water-based fire protection systems, including land-based and marine applications. 1.1.1 This standard does not address all of the inspection, testing, and maintenance of the electrical components of the automatic fire detection equipment for preaction and deluge systems that are addressed by NFPA 72, National Fire Alarm Code. The inspection, testing, and maintenance required by this standard and NFPA 72, National Fire Alarm Code, shall be coordinated so that the system operates as intended. 1.1.2 The types of systems addressed by this standard include, but are not limited to, sprinkler, standpipe and hose, fixed water spray, and foam water. Included are the water supplies that are part of these systems, such as private fire service mains and appurtenances, fire pumps and water storage tanks, and valves that control system flow. The document also addresses impairment handling and reporting. This standard applies to fire protection systems that have been properly installed in accordance with generally accepted practices. Where a system has not been installed in accordance with generally accepted practices, the corrective action is beyond the scope of this standard. The corrective action to ensure that the system performs in a satisfactory manner shall be in accordance with the appropriate installation standard. 1.1.3 This standard shall not apply to sprinkler systems designed and installed in accordance with NFPA 13D, Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes. A.1.1 Generally accepted NFPA installation practices for water-based fire protection systems relevant to this standard are found in the following: NFPA 13, Standard for the Installation of Sprinkler Systems. NFPA 13R, Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height. NFPA 14, Standard for the Installation of Standpipe and Hose Systems. NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection. NFPA 16, Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems. NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection. NFPA 22, Standard for Water Tanks for Private Fire Protection. NFPA 24, Standard for the Installation of Private Fire Service Mains and Their Appurtenances. NFPA 750, Standard on Water Mist Fire Protection Systems. For systems originally installed in accordance with one of these standards, the repair, replacement, alteration or extension of such systems should also be performed in accordance with that same standard. When original installations are based on other applicable codes or standards, repair, replacement, alteration, or extension practices should be conducted in accordance with those other applicable codes or standards.

Sacramento Fire Sprinkler Maintenance, Service & Repair

Repairs and service are generally discovered during routine maintenance of the tests and inspections that are performed by State licensed fire sprinkler companies or fire sprinkler contractors in Sacramento. All repairs and service should be completed immediately to avoid receiving a violation.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Dry Chemical Fire Extinguishers

The most common household fire extinguisher is the dry chemical extinguisher. The dry chemical extinguisher is designed to handle Class A fires such as organic solid material such as wood, Class B fires that involve liquid such as gas and oil, and Class C fires that involve electricity. The dry chemical extinguisher can be designed and installed for fixed system use and portable extinguisher use. If using a portable dry chemical extinguisher use caution when fighting active fires and contact authorities should the fire breach the contained area.

Fire has a long history of presenting issues to humankind through loss of life, loss of property, and personal possessions. The first patented fire extinguisher was created in 1723, by Ambrose Godfrey designed to extinguish a fire should the need arise. Since then many improvements have been made and fire extinguishers are now designed for specific use, such as the dry chemical fire extinguisher. Any work that is performed on fire extinguishers should be completed by State licensed fire extinguisher companies or fire extinguisher contractors in Sacramento.

Dry Chemical Fire Extinguishers

Wikipedia states there are several types of dry chemical fire extinguishing agents that are listed below.
Dry chemical This is a powder based agent that extinguishes by separating the four parts of the fire tetrahedron. It prevents the chemical reaction involving heat, fuel, and oxygen and halts the production of fire sustaining "free-radicals", thus extinguishing the fire.
Mono ammonium phosphate, also known as "tri-class", "multipurpose" or "ABC" dry chemical, used on class A, B, and C fires. It receives its class A rating from the agent's ability to melt and flow at 177 °C (350 °F) to smother the fire, more corrosive than other dry chemical agents, pale yellow in color.
Sodium bicarbonate, "regular" or "ordinary" used on class B and C fires, was the first of the dry chemical agents developed. In the heat of a fire, it releases a cloud of carbon dioxide that smothers the fire. That is the gas drives oxygen away from the fire, thus stopping the chemical reaction. This agent is not generally effective on class A fires because the agent is expended and the cloud of case dissipates quickly, and if the fuel is still sufficiently hot, the fire starts up again. While liquid and gas fires don't usually store much heat in their fuel source, solid fires do. Sodium bicarbonate was very common in commercial kitchens before the advent of wet chemical agents, but now is falling out of favor, as it is much less effective than wet chemical agents for class K fires, less effective than Purple-K for class B fires, and is ineffective on class A fires, white or blue in color.
Potassium bicarbonate (aka Purple-K), used on class B and C fires. About two times as effective on class B fires as sodium bicarbonate, it is the preferred dry chemical agent of the oil and gas industry. The only dry chemical agent certified for use in ARFF by the NFPA, Violet in color.
Potassium bicarbonate & Urea Complex (aka Monnex/ Powerex), used on Class B and C fires. More effective than all other powders due to its ability to decrepitate (where the powder breaks up into smaller particles) in the flame zone creating a larger surface area for free radical inhibition. Grey in color.
Potassium Chloride or Super-K dry chemical was developed in an effort to create a high efficiency, protein-foam compatible dry chemical. Developed in the 60s, prior to Purple-K, it was never as popular as other agents since, being a salt, it was quite corrosive, for B and C fires, white in color.
Foam-Compatible, which is a sodium bicarbonate (BC) based dry chemical, was developed for use with protein foams for fighting class B fires. Most dry chemicals contain metal stearates to waterproof them, but these will tend to destroy the foam blanket created by protein (animal) based foams. Foam compatible type uses silicone as a waterproofing agent, which does not harm foam. Effectiveness is identical to regular dry chemical, and it is light green in color (some ANSUL brand formulations are blue). This agent is generally no longer used since most modern dry chemicals are considered compatible with synthetic foams such as AFFF.
MET-L-KYL / PYROKYL is a specialty variation of sodium bicarbonate for fighting pyrophoric liquid fires (ignite on contact with air). In addition to sodium bicarbonate, it also contains silica gel particles. The sodium bicarbonate interrupts the chain reaction of the fuel and the silica soaks up any unburned fuel, preventing contact with air. It is effective on other class B fuels as well, blue, red in color.

OSHA Fire Extinguisher Requirements in Sacramento

OSHA has the following requirements for commercial buildings and public use facilities:
• Part Number: 1910
• Part Title: Occupational Safety and Health Standards
• Subpart: L
• Subpart Title: Fire Protection
• Standard Number: 1910.161
• Title: Fixed extinguishing systems, dry chemical.

--------------------------------------------------------------------------------
1910.161(a)
Scope and application
This section applies to all fixed extinguishing systems, using dry chemical as the extinguishing agent, installed to meet a particular OSHA standard. These systems shall also comply with 1910.160.
1910.161(b)
Specific requirements
1910.161(b) (1)
The employer shall assure that dry chemical agents are compatible with any foams or wetting agents with which they are used.
1910.161(b) (2)
The employer may not mix together dry chemical extinguishing agents of different compositions. The employer shall assure that dry chemical systems are refilled with the chemical stated on the approval nameplate or an equivalent compatible material.
1910.161(b) (3)
When dry chemical discharge may obscure vision, the employer shall provide a pre-discharge employee alarm which complies with 1910.165 and which will give employees time to safely exit from the discharge area prior to system discharge.
..1910.161(b) (4)
1910.161(b) (4)
The employer shall sample the dry chemical supply of all but stored pressure systems at least annually to assure that the dry chemical supply is free of moisture which may cause the supply to cake or form lumps.
1910.161(b)(5)
The employer shall assure that the rate of application of dry chemicals is such that the designed concentration of the system will be reached within 30 seconds of initial discharge.
[45 FR 60712, Sept. 12, 1980]

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Dry Pipe Fire Sprinkler System

A dry pipe system is optimal for fire sprinkler protection when ambient temperatures reach freezing, rendering a wet pipe fire sprinkler system inoperable. The dry pipe system is the second most common system to be installed and is often used in structures that do not have adequate heating, such as garages, and storage facilities.

The dry pipe fire sprinkler system is a network of pipes, alarms, control valves, and fire sprinkler heads. The dry pipe systems pipes are not filled with water until one of the automatic fire sprinkler heads attached to the system opens after reaching a set temperature. This forces a change in air pressure in the system allowing water to fill all the pipes, and for all the automatic fire sprinkler heads to open extinguishing the fire.

NFPA 13D has created a standard for the installation of fire sprinkler systems, detailing information for the combined dry pipe and pre action system. “1.1* Scope. 1.1.1 This standard shall cover the design, installation, and maintenance of automatic sprinkler systems for protection against the fire hazards in one- and two-family dwellings and manufactured homes. 1.1.2 This standard assumes that the sprinkler system is designed to protect against a fire originating from a single ignition location.”

Any work performed should be completed by State licensed fire sprinkler companies or fire sprinkler contractors in Sacramento.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Dry Standpipe Fire Sprinklers

The dry standpipe is a network of installed pipes into your building or facility, there is an absence of any liquid in the dry standpipe fire protection system until the authorities or fire department connects a water supply to the dry standpipe for use of the dry standpipe system.

Standpipe fire sprinkler systems are installed into buildings or structures that have more than one story, most often recognized in high rises and skyscrapers. Each floor will have access points from the standpipe fire sprinkler system for fire fighters to connect fire hoses to access the water main to help extinguish fire.

Always work with active State licensed fire sprinkler companies or fire sprinkler contractors in Sacramento when performing installations, service or repair of stand pipe fire sprinkler systems.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair

Sacramento Fire Alarms

Fire alarms are designed to alert you of the presence, risk or danger from the devastating effects of fire. There are heat detection alarms, carbon monoxide alarms and smoke alarms. The fire alarms main job is alerting you to the presence, risk or danger of fire, alert off-site facilities/authorities (Fire Department) and initiate the fire sprinklers and fire protection system.

Automatic fire alarms, such as carbon monoxide, and smoke are generally found in most buildings including public and private residences. Alarm systems are only as good as the monitoring they receive. By shopping and comparing fire alarm monitoring companies you can get estimates towards the monthly cost to monitor your installed fire alarm systems.

Always work with actively licensed fire alarm companies in Sacramento to help you comply with all fire codes, rules and regulations.

Sacramento Fire Prevention and Safety	Phone: (916) 476-2733
Email: sacramentofirepro@gmail.com Sacramento Fire Protection Sacramento Fire Sprinklers Sacramento Fire Protection Service
Emergency Fire Protection Service Available Install, Service & Repair